Welcome! Log In Create A New Profile

Advanced

Re: Bob, congrats on finding a great detector & coil set-up.thumbs up

May 29, 2019 04:00PM
Monte....my findings as instructed...

Step A:
--► Turn on the detector and adjust to Maximum Sensitivity. Reduce, if needed, to just barely eliminate any instability.
--► Adjust the Discrimination to the absolute Minimum setting.
--► Press-and-hold the Pinpoint button and adjust for a proper slight audio Threshold hum.
--► Position the search coil about 6" above the mineralized ground, rock, etc.
--► Press-and-hold the Pinpoint button to hear the Threshold hum and lower the search coil to about 1" from the ground.
NOTE: What was the audio response as the coil was lowered toward the ground?

As I lowered the coil to the ground...within an inch or two of the soil I get a slight hum when I pull up on the coil...push down and the coil it is silent.

Step B:
--► In the silent-search Disc. mode, bob the search coil towards-and-away from the ground from 6" to 1" a few times.
NOTE: Was there any audio response as the coil APPROACHED the ground? Was there any audio response as the coil was LIFTED AWAY from the ground?

As I pushed up or down there was no audio response in either direction.


Step C:
--► Still leaving the Disc. at Minimum, hold the Silver Dollar as if flat-to-the-coil and move it past the coil at about 3" to 4" from the search coil.
NOTE: Did you get a good clean audio response from the Silver Dollar or not in the Discriminate mode?

As instructed I used a Silver dollar Morgen and got a clean crisp beep as I passed the coin under the coil..starting out at 3" to 6"...the beep got fainter as I moved further from the coil out to about 8.5"

There are my finding up to date...

Cheers Bob.
Subject Author Views Posted

Proper method to ground balance a Silver Sabre microMax

Whimpster 143 May 29, 2019 07:38AM

Bob, congrats on finding a great detector & coil set-up.thumbs up

Monte 144 May 29, 2019 09:29AM

Re: Bob, congrats on finding a great detector & coil set-up.thumbs up

Whimpster 97 May 29, 2019 04:00PM

Now the easy part .. smiling smiley .. Adjusting the internal GB trimmer.

Monte 128 May 30, 2019 05:53AM

Re: Now the easy part .. smiling smiley .. Adjusting the internal GB trimmer.

Whimpster 115 May 30, 2019 06:51AM



Sorry, only registered users may post in this forum.

Click here to login

Online Users

Guests: 30
Record Number of Guests: 302 on March 10, 2018