Welcome! Log In Create A New Profile

Advanced

Re: GB'ing BandidoIIµMax and Clock Position of Dial Indicator when "drag" is felt.

September 28, 2020 02:40AM
The GB 3 3/4 turn pot does not have an end stops.
Replacements can be hard to find as they were special order.
I believe it has a 50k ohm value.

You could swap out for a 10 turn, they are much bigger and would only fit in the area of the Mode toggle switch.

--------------------------------------------------------------
I dig it with a Nokta/Makro product.
Impact...M-Kruzer..Anfibio-Multi...Simplex
Subject Author Views Posted

GB'ing BandidoIIµMax and Clock Position of Dial Indicator when "drag" is felt.

ToddB64 68 September 27, 2020 06:01PM

I wouldn't worry about the friction drag on the ground balance control....

Hombre 43 October 10, 2020 08:59PM

Re: I wouldn't worry about the friction drag on the ground balance control....

ToddB64 30 October 12, 2020 02:55PM

ToddB64, some quick replies that might be helpful.

Monte 44 September 28, 2020 09:05AM

Re: ToddB64, some quick replies that might be helpful.

ToddB64 37 September 28, 2020 11:30AM

Re: ToddB64, some quick replies that might be helpful.

GeoW 36 September 28, 2020 07:19PM

Re: ToddB64, some quick replies that might be helpful.

ToddB64 22 October 12, 2020 04:53PM

Re: GB'ing BandidoIIµMax and Clock Position of Dial Indicator when "drag" is felt.

SvenS 52 September 28, 2020 02:40AM

Re: GB'ing BandidoIIµMax and Clock Position of Dial Indicator when "drag" is felt.

ToddB64 23 October 12, 2020 03:33PM



Sorry, only registered users may post in this forum.

Click here to login

Online Users

Guests: 7
Record Number of Users: 13 on January 18, 2018
Record Number of Guests: 356 on August 30, 2020