Welcome! Log In Create A New Profile

Advanced

Re: The confusion of 'filtering' --- Required Vs Allowable Sweep Speed --- Recovery Time from Rejection.

Anonymous User
October 16, 2018 09:52AM
Hi Monte !

I copied & pasted the following two paragraphs from your subject post and numbered them for reference from the bottom-up.

My question is of a rhetorical nature : Why would that model's "recovery Speed" be impaired when in paragraph #6 the Disc. was increased to "just" reject the iron nail ?

I guess this is another instance of how we interpret the word "just", similar to our past President's statement ""It depends upon what the meaning of the word is... is."

If the Disc. had been set a smidgen or more farther up the arc, I assume the model's recovery speed would be operating at it's designed (unimpaired) speed and the coil would have passed over the nails with no response and signaled the coins in the normal manner......Agree ?

#6..Now, take that very same detector and coil and use about three or four 3" to 4" iron nails and remove every-other coin and replace it with an iron nail. First, however, increase the detector's Discrimination to just reject the iron nail.

#5..Then, sweep down-the-line again and compare how that model's "recovery speed" might not be too impressive when it is also trying to reject (Discriminate or filter-out) the trash and still hit on the next desired target.

ToddB64
Subject Author Views Posted

Does the number of filters in a metal detector affect recommended sweep speed ?

Anonymous User 490 October 12, 2018 08:34AM

The confusion of 'filtering' --- Required Vs Allowable Sweep Speed --- Recovery Time from Rejection.

Monte 449 October 12, 2018 09:20PM

Re: The confusion of 'filtering' --- Required Vs Allowable Sweep Speed --- Recovery Time from Rejection.

Anonymous User 320 October 16, 2018 06:45PM

ToddB64, pardon my tardy reply regarding your three models and 'filter' questions..

Monte 311 November 03, 2018 07:49PM

Re: The confusion of 'filtering' --- Required Vs Allowable Sweep Speed --- Recovery Time from Rejection.

Anonymous User 323 October 16, 2018 09:52AM

Let me try to answer your questions, Todd. .. Lengthy again confused smiley

Monte 394 October 18, 2018 08:13AM

Re: The confusion of 'filtering' --- Required Vs Allowable Sweep Speed --- Recovery Time from Rejection.

jmaryt 289 October 15, 2018 09:56PM

Re: The confusion of 'filtering' --- Required Vs Allowable Sweep Speed --- Recovery Time from Rejection.

Anonymous User 314 October 16, 2018 10:55AM

Re: Does the number of filters in a metal detector affect recommended sweep speed ?

Hombre 383 October 12, 2018 12:05PM

Re: Does the number of filters in a metal detector affect recommended sweep speed ?

Anonymous User 358 October 12, 2018 12:53PM

Just a quick tip on sweep speedthumbs up

Hombre 327 October 12, 2018 02:56PM

Re: Just a quick tip on sweep speedthumbs up

Anonymous User 310 October 12, 2018 04:01PM



Sorry, only registered users may post in this forum.

Click here to login

Online Users

Guests: 22
Record Number of Guests: 302 on March 10, 2018