Welcome! Log In Create A New Profile

Advanced

Eq800 hunting in 50 tones with the "horseshoe" ON

March 28, 2020 01:59PM avatar
If I'm in heavier trash, i typically run 5 tones with the horseshoe on to manage the noise. If things are NOT so busy, I work with the 50 tones and horseshoe on.

I've been working on the Fe / F2 setting as well, using the newer F2 setting and see how low i can stand it and the results.

Prior to the software upgrade, i had my Ferrous setting on 2. If I went lower, my recovery rate of rusty bent nails went WAY up. At 2, I was consistently finding co-located coins in the rusty nails. And finding what I consider HARD targets.

Supposedly, the addition of the newer Ferrous settings under F2 improves the audio differences between ferrous / non-ferrous items. They audio differences are learned. I currently have my F2 setting on 2, which I believe correlates to the old 0 of the previous Fe settings. I have been digging more rusty nails and pieces of nails. The experiment continues as I work to find a good balance between rusty nails and masked keepers for my area.


Rich -

It's YOU that makes the difference.

800 - Deus
Subject Author Views Posted

Eq800 hunting in 50 tones with the "horseshoe" ON

Sodbuster 240 March 28, 2020 08:44AM

A reply from a Non-Equinox owner.

Monte 198 March 28, 2020 03:00PM

Eq800 hunting in 50 tones with the "horseshoe" ON

UtahRich 146 March 28, 2020 01:59PM

Re: Eq800 hunting in 50 tones with the "horseshoe" ON

diggindeep 143 March 28, 2020 11:08AM

Re: Eq800 hunting in 50 tones with the "horseshoe" ON

Kickindirt 143 March 28, 2020 10:37AM



Sorry, only registered users may post in this forum.

Click here to login

Online Users

Guests: 48
Record Number of Guests: 356 on August 30, 2020