Welcome! Log In Create A New Profile

Advanced

Re: Factory Flush -

November 12, 2018 08:13PM
Rich-----Please let us know what your opinion is after you do the factory reset.----I have gone through all of that with going back & forth from v1.5 to v1.75 and doing the factory reset also.-----I have settled on 1.75 as it hits coins on edge really well and the I.D. on targets while hunting (coins) is very good.-----The depth read out on either version leaves a little to be desired IMO but that may be because I am so used of our CTX's & Etracs which are excellent in that regard.---------Del
Quote
Rich (Utah)

Well Rich,
Don't fix what ain't broken.
I had no trouble doing the update or reversing it so hopefully I will be in the same shape after going back to the 1.75 version.
Cheers,
Drew.

Drew,

I've bounced back and forth and back and forth and am currently BACK on the v1.5 where I've spent the VAST majority of my time with my EQ800. No particular reason.

I'm going to document all of my settings tonight and give my detector the factory WIPE just to see if there is something that I'm missing that I'm not seeing. Other than taking time, I can't imagine it would hurt anything and I've should have sat down before now to document in detail ALL of the settings in all of the modes that work really well for me in my area.

As for the v1.5 software, other than the questionable depth readings, I don't have much of anything to complain about. I've made some really good finds with it this year for the time I've been able to hunt and have used enough machines out there to know that it does an above average job of finding stuff.

I'm hoping to get out another time or two before the snows of winter descend on me and I get 'cabin bound' until spring.

Rich -
Subject Author Views Posted

Minelab Equinox 800 / 600 Software Upgrade . .

Rich (Utah) 310 September 06, 2018 10:33PM

Re: Minelab Equinox 800 / 600 Software Upgrade . .

Druid 174 November 06, 2018 10:51PM

Re: Minelab Equinox 800 / 600 Software Upgrade . .

Rich (Utah) 173 November 11, 2018 12:52AM

Re: Minelab Equinox 800 / 600 Software Upgrade . .

Druid 162 November 11, 2018 11:44AM

Factory Flush -

Rich (Utah) 167 November 12, 2018 06:41PM

Re: Factory Flush -

Druid 101 January 07, 2019 02:02PM

Re: Factory Flush -

D&P-OR 182 November 12, 2018 08:13PM

Factory Flush -

Rich (Utah) 137 November 15, 2018 11:23PM

Re: Factory Flush -

D&P-OR 177 November 16, 2018 01:15PM

Deep Franklin Half

Rich (Utah) 96 January 04, 2019 11:58PM

Software All Refreshed, Cleaned Up and Ready to Go.-

Rich (Utah) 132 November 16, 2018 09:19PM

Minelab Equinox Software Upgrade . .

Rich (Utah) 202 November 06, 2018 04:42PM

Minelab Equinox 800 / 600 Software Upgrade . .

Rich (Utah) 194 September 25, 2018 05:04PM



Sorry, only registered users may post in this forum.

Click here to login

Online Users

Guests: 20
Record Number of Guests: 302 on March 10, 2018