Quote
UtahRich

HF coils should work just fine with versions 5.0 and up. I'm running 5.2 and I only have the 9" HF coil. It works just fine.

Andrew,

It is my understanding that the new x35 Coils (9", 11" and 11"x13") and HF coils (5"x9.5" and 9") are running v5.x and MUST be used with a controller running 5.0 or higher. Only the OLDER Low Frequency coils that are pre-x35 / HF (LF 9", LF 11" and LF 11"x13") can be used with software that is pre-v5.x. And the OLDER LF coils can be updated to the newer v5 software if wanted.

If I am misunderstanding this, let me know.

thanks,


Rich -