Welcome! Log In Create A New Profile


Pull tab question

November 25, 2018 11:23AM
Yes I’m bored, unable to detect because of the frozen ground. I have been bench testing at the kitchen table. Playing with the classic ID, and the III SL. I have a pile of pull tabs that I keep for testing. Also to keep track of how many I pull from one location until gold or a buffalo appears. I decided to scan every tb on my ID to see where they registered at. The small pile in the picture all hit at 5 cents, but with a small target bounce. The larger top pile all nailed pretty solid on the pull tab block to the right of nickels. All the nickels I tested were a solid ID with the ghost flash.
My question is how consistent should I expect the pulltabs to be in the ground on the ID? Now keep in mind, I want to dig them all up. I’m not trying to ignore them. Just trying to get a feel for the machine. It’s going to be a long winter.

Subject Author Views Posted

Pull tab question

Jamie 319 November 25, 2018 11:23AM

I've found that that the pull tab range of conductivity is sometimes a great targetthumbs up

Hombre 213 December 06, 2018 04:48PM

Re: Pull tab question

RickUK 202 December 04, 2018 11:18PM

The NOTCH and Schemes for Avoiding Pull Tabs / Square Tabs

UtahRich 224 December 04, 2018 09:38PM

The 'Tab' dilemma is more than a simple question to answer.confused smiley

Monte 254 November 26, 2018 12:00PM

Re: The 'Tab' dilemma is more than a simple question to answer.confused smiley

Jamie 208 December 02, 2018 06:36PM

I will dig those tabs and stop testing.thumbs up

Monte 236 December 03, 2018 09:31AM

Sorry, only registered users may post in this forum.

Click here to login

Online Users

Guests: 23
Record Number of Users: 13 on January 18, 2018
Record Number of Guests: 302 on March 10, 2018