Welcome! Log In Create A New Profile


Re: Thanks for the reply Monte!

July 24, 2019 09:47PM avatar
Hey Randy, I have a Deus and I read your post and thought I’d try the “on edge” test. I took a clad dime and quarter and stuck them half way into the dirt. I used factory programs #2 and #9 called GM Power and HOT, respectively. These are the two programs I use most and I did not make any adjustments. Our dirt ground balances similar to Toano, NV.

In both programs I got a “diggable” signal both longitudinally and across. Although the cross passes were less desirable signals, I would have still dug them. The longitudinal pass gave a “double beep.” I then pushed the coins completely underground and got the same results.

Not sure how that other machine was set up but I was successful. Hope this helps answer your questions.
Subject Author Views Posted

By request: How my set of detectors handle 'on-edge' coins.

Monte 399 July 21, 2019 07:39AM

Diggin' those 'on-edge' coins. Both shallow and deep. thumbs up N/T

UtahRich 193 July 25, 2019 12:54AM

"... and deep?" - - Rich, I was waiting for your comments regarding "at depth."

Monte 241 July 27, 2019 07:56AM

Nothing to add. N/T

UtahRich 175 July 28, 2019 12:06AM

Re: A little to add.

Remfire 273 July 28, 2019 08:33AM

Things happen! ... Even at 4" deep.

Monte 199 July 28, 2019 11:58AM

Thanks for the reply Monte!

Hombre 241 July 21, 2019 07:08PM

Re: Thanks for the reply Monte!

Remfire 179 July 24, 2019 09:47PM

Thanks for your reply Remfire..

Hombre 220 July 25, 2019 06:36AM

Sorry, only registered users may post in this forum.

Click here to login

Online Users

Guests: 47
Record Number of Guests: 302 on March 10, 2018