Welcome! Log In Create A New Profile

Advanced

Re: OregonGregg being a pain in the behind again sad smiley

November 16, 2020 12:17PM
Rich .... you hit the nail on the head ... and I agree with you the test should simulate the environment you are going to detect ... And therefore it is necessary to perform a series of tests that simulates various detection scenarios.

1st depth test - simulation in at least 3 different mineralized terrains .. low mineralization, medium and very strong and limited mineralization .. / I use 5 levels of mineralization tests./

2..Separation test .. it confuses several 2D and 3D separation tests..which shows as a detector and aka coil of proof to work in a given separation test ..
THE IDEAL DETECTOR can pass all 2D and 3D depth separation tests very well ..- only if ... it uses the ideal coil size ...

After the correct setting of the detector for 2D and 3D separation, we go further .. to:

3. "Test field" on higher mineralization .From more than 40 fragments buried in gold / gold jewelry, silver, copper, and bronze small coins, medium and large coins, and depots of silver and bronze at various depths ... and some tested targets they are naturally camouflaged with iron or ceramic .. + for some purposes, iron or coke was additionally stored - so they simulate 2D and 3D well ..

Targets are also scored according to depth or separation requirements ..., but there are also negative points for coke and some iron - which detectors show as color ..

The maximum test field is 150 points ... and the excellent detectors can get about 110-130 points .. so far ..
Subject Author Views Posted

Comparison Tests ... They can be interesting, and here's a 're-test' I'm doing.

Monte 108 November 16, 2020 05:54AM

A report of a lot of detectors using their 'standard' search coil.

Monte 72 November 19, 2020 07:46AM

Any Thoughts of tossing some Rusty Tin in the Mix ?

UtahRich 41 November 19, 2020 04:34PM

Rusty Tin? Yes, it's on the agenda.

Monte 48 November 19, 2020 05:15PM

Rusty Tin - the bane of the ghost towns.

UtahRich 27 November 20, 2020 01:48AM

Rich, my thoughts regarding your thoughts.thinking

Monte 29 November 20, 2020 05:40AM

Re: Rusty Tin? Yes, it's on the agenda. Attachments

Kickindirt 39 November 19, 2020 11:00PM

No, I'm not kidding, if you read what I said or implied.

Monte 30 November 20, 2020 04:08AM

Re: No, I'm not kidding <--- lol where's your sense of humor

OregonGregg 32 November 20, 2020 12:57PM

Where's your sense of individuality ?

UtahRich 29 November 20, 2020 04:15PM

Re: Where's your sense of individuality ?

OregonGregg 30 November 20, 2020 04:53PM

Exactly! Confront it, learn it and YOUR detectors, and the future will be brighter. N/T

Monte 20 November 20, 2020 08:08PM

Sending you a PM - winking smiley N/T

UtahRich 17 November 20, 2020 06:25PM

Well Thank ya....sent you one to. N/T

OregonGregg 17 November 20, 2020 07:00PM

Still busy testing, but will have two upcoming comparisons.

Monte 50 November 17, 2020 02:02PM

Re: Still busy testing, but will have two upcoming comparisons.

D&P-OR 51 November 17, 2020 03:22PM

OregonGregg being a pain in the behind again sad smiley

OregonGregg 67 November 16, 2020 08:09AM

Gregg, I think you forgot .....

Monte 67 November 16, 2020 01:31PM

Re: OregonGregg being a pain in the behind again sad smiley

EL NINO 63 November 16, 2020 12:46PM

What's going to happen with the M6 ?

UtahRich 68 November 16, 2020 06:59PM

Re: What's going to happen with the M6 ?

OregonGregg 70 November 16, 2020 07:09PM

Re: What's going to happen with the M6 ?

EL NINO 46 November 17, 2020 06:13AM

Re: What's going to happen with the M6 ?

OregonGregg 47 November 17, 2020 07:49AM

Handle angle

SvenS 35 November 17, 2020 05:56PM

Re: Handle angle

OregonGregg 29 November 17, 2020 06:33PM

Re: Come on down Gregg!!

Kickindirt 37 November 17, 2020 01:39PM

Re: Come on down Gregg!!

OregonGregg 25 November 17, 2020 02:33PM

Re: Come on down Gregg!!

Kickindirt 35 November 17, 2020 04:19PM

Re: Come on down Gregg!!

D&P-OR 38 November 17, 2020 05:29PM

Re: Come on down Gregg!!

Kickindirt 27 November 17, 2020 06:05PM

Re: Come on down Gregg!!

D&P-OR 31 November 17, 2020 07:18PM

Re: ya Del

Kickindirt 23 November 17, 2020 09:00PM

I just checked NOAA, and 32° at 12:56 in the afternoon it isn't likely Gregg will head your way.

Monte 33 November 17, 2020 02:15PM

Re: I just checked NOAA, and 32° at 12:56 in the afternoon it isn't likely Gregg will head your way.

OregonGregg 30 November 17, 2020 02:37PM

Re: I just checked NOAA, and 32° at 12:56 in the afternoon it isn't likely Gregg will head your way.

D&P-OR 37 November 17, 2020 03:08PM

Did I read this correctly? Meet at Del & Patsy's for a winter long hunt ?

UtahRich 22 November 18, 2020 09:42PM

Re: Come on down Gregg!!

D&P-OR 38 November 17, 2020 01:45PM

Re: Come on down Gregg!!

OregonGregg 31 November 17, 2020 02:34PM

Re: What's going to happen with the M6 ?

Kickindirt 74 November 16, 2020 08:53PM

Re: What's going to happen with the M6 ?

OregonGregg 54 November 16, 2020 09:23PM

Re: What's going to happen with the M6 ?

Kickindirt 50 November 16, 2020 10:23PM

Here ya go

OregonGregg 50 November 16, 2020 10:42PM

That's not the response I expected . . . . . thinking

UtahRich 49 November 16, 2020 09:10PM

Re: That's not the response I expected . . . . . thinking

D&P-OR 49 November 16, 2020 09:25PM

So is Patsy there too ?

UtahRich 44 November 16, 2020 09:30PM

Re: So is Patsy there too ?

D&P-OR 44 November 16, 2020 09:42PM

Dinner Bell

UtahRich 43 November 16, 2020 09:44PM

confused smiley

UtahRich 48 November 16, 2020 08:32PM

The M6 - We need some clarification with your results.

UtahRich 57 November 16, 2020 07:14PM

Re: The M6 - We need some clarification with your results.

OregonGregg 58 November 16, 2020 08:11PM

OregonGregg being a pain in the behind again sad smiley

UtahRich 50 November 16, 2020 10:38AM

Rich, a few comments back to you.

Monte 66 November 16, 2020 01:21PM

What's Your Detector IQ ?

UtahRich 46 November 16, 2020 07:40PM

Re: OregonGregg being a pain in the behind again sad smiley

EL NINO 45 November 16, 2020 12:17PM

Re: OregonGregg being a pain in the behind again sad smiley

Druid 38 November 16, 2020 11:28PM

Re: OregonGregg being a pain in the behind again sad smiley

EL NINO 38 November 17, 2020 05:46AM

Re: OregonGregg being a pain in the behind again sad smiley

Druid 22 November 18, 2020 12:00PM

Re: OregonGregg being a pain in the behind again sad smiley

EL NINO 25 November 18, 2020 02:54PM

Re: OregonGregg being a pain in the behind again sad smiley

EL NINO 29 November 18, 2020 01:39PM

This machine looks familiar

zincoln 20 November 18, 2020 04:05PM

Re: This machine looks familiar

EL NINO 26 November 18, 2020 08:45PM

Thx for sharing

zincoln 20 November 18, 2020 10:44PM

Re: Thx for sharing

EL NINO 23 November 19, 2020 03:35AM

Setting Up Tests for your own detectors -

UtahRich 49 November 16, 2020 07:30PM

Agree 100%

OregonGregg 43 November 16, 2020 11:08AM

Customizing a Test -

UtahRich 50 November 16, 2020 06:52PM

Re: Agree 100%

Kickindirt 55 November 16, 2020 05:57PM

Joel, just some responses to your thoughts.

Monte 26 November 17, 2020 09:26PM



Sorry, only registered users may post in this forum.

Click here to login

Online Users

Guests: 15
Record Number of Users: 13 on January 18, 2018
Record Number of Guests: 632 on November 18, 2020