Welcome! Log In Create A New Profile

Advanced

Re: Still busy testing, but will have two upcoming comparisons.

November 17, 2020 03:22PM
Are those "depth tests" going to be air tests or actual in the ground target tests?-------Del---
Quote
Monte
That's right, I plan to do a couple more tests. One of them will be a 'Depth-of-Detection Test' which will be using bigger-size standard coils or larger-size search coils. This will include coils like a 7X11 or 8½X11 or 9X12 or 11" round-shaped or others that would qualify. It will not include smaller or mid-sized search coils. The 'testing' will only be for 'Depth' and not factor in things like Separation or Recovery Tome, etc., etc. Just see what detectors and coils can provide some enhance performance in the 'deep-seeking' category.

The other 'Test' will be just the opposite. It is going to be a Smaller-Size Coil Test' which means there will also be some after-market coils in that competition as well as some from detector makers. Keep in mind that some detector manufacturers do not make a smaller-size coil for some of their models and we have to rely on the after-market folks to help us get the gob done in very heavy trash.

Currently I have the excellent, light and comfortable new NEL Super Fly for the Teknetics T2 series, and I am expecting to get a few more bigger and smaller coils from both detector and after-market folks. Might have to call upon a few people who have some competitive-size coils I don't to get the testing done, but it should be interesting.

Just a bit of a heads-up on what will be coming in the future.

Monte



Edited 2 time(s). Last edit at 11/17/2020 03:29PM by D&P-OR.
Subject Author Views Posted

Comparison Tests ... They can be interesting, and here's a 're-test' I'm doing.

Monte 108 November 16, 2020 05:54AM

A report of a lot of detectors using their 'standard' search coil.

Monte 70 November 19, 2020 07:46AM

Any Thoughts of tossing some Rusty Tin in the Mix ?

UtahRich 41 November 19, 2020 04:34PM

Rusty Tin? Yes, it's on the agenda.

Monte 46 November 19, 2020 05:15PM

Rusty Tin - the bane of the ghost towns.

UtahRich 27 November 20, 2020 01:48AM

Rich, my thoughts regarding your thoughts.thinking

Monte 29 November 20, 2020 05:40AM

Re: Rusty Tin? Yes, it's on the agenda. Attachments

Kickindirt 39 November 19, 2020 11:00PM

No, I'm not kidding, if you read what I said or implied.

Monte 30 November 20, 2020 04:08AM

Re: No, I'm not kidding <--- lol where's your sense of humor

OregonGregg 32 November 20, 2020 12:57PM

Where's your sense of individuality ?

UtahRich 29 November 20, 2020 04:15PM

Re: Where's your sense of individuality ?

OregonGregg 30 November 20, 2020 04:53PM

Exactly! Confront it, learn it and YOUR detectors, and the future will be brighter. N/T

Monte 20 November 20, 2020 08:08PM

Sending you a PM - winking smiley N/T

UtahRich 17 November 20, 2020 06:25PM

Well Thank ya....sent you one to. N/T

OregonGregg 17 November 20, 2020 07:00PM

Still busy testing, but will have two upcoming comparisons.

Monte 49 November 17, 2020 02:02PM

Re: Still busy testing, but will have two upcoming comparisons.

D&P-OR 46 November 17, 2020 03:22PM

OregonGregg being a pain in the behind again sad smiley

OregonGregg 64 November 16, 2020 08:09AM

Gregg, I think you forgot .....

Monte 67 November 16, 2020 01:31PM

Re: OregonGregg being a pain in the behind again sad smiley

EL NINO 62 November 16, 2020 12:46PM

What's going to happen with the M6 ?

UtahRich 67 November 16, 2020 06:59PM

Re: What's going to happen with the M6 ?

OregonGregg 70 November 16, 2020 07:09PM

Re: What's going to happen with the M6 ?

EL NINO 46 November 17, 2020 06:13AM

Re: What's going to happen with the M6 ?

OregonGregg 47 November 17, 2020 07:49AM

Handle angle

SvenS 34 November 17, 2020 05:56PM

Re: Handle angle

OregonGregg 29 November 17, 2020 06:33PM

Re: Come on down Gregg!!

Kickindirt 37 November 17, 2020 01:39PM

Re: Come on down Gregg!!

OregonGregg 25 November 17, 2020 02:33PM

Re: Come on down Gregg!!

Kickindirt 35 November 17, 2020 04:19PM

Re: Come on down Gregg!!

D&P-OR 37 November 17, 2020 05:29PM

Re: Come on down Gregg!!

Kickindirt 27 November 17, 2020 06:05PM

Re: Come on down Gregg!!

D&P-OR 30 November 17, 2020 07:18PM

Re: ya Del

Kickindirt 23 November 17, 2020 09:00PM

I just checked NOAA, and 32° at 12:56 in the afternoon it isn't likely Gregg will head your way.

Monte 32 November 17, 2020 02:15PM

Re: I just checked NOAA, and 32° at 12:56 in the afternoon it isn't likely Gregg will head your way.

OregonGregg 30 November 17, 2020 02:37PM

Re: I just checked NOAA, and 32° at 12:56 in the afternoon it isn't likely Gregg will head your way.

D&P-OR 36 November 17, 2020 03:08PM

Did I read this correctly? Meet at Del & Patsy's for a winter long hunt ?

UtahRich 21 November 18, 2020 09:42PM

Re: Come on down Gregg!!

D&P-OR 37 November 17, 2020 01:45PM

Re: Come on down Gregg!!

OregonGregg 31 November 17, 2020 02:34PM

Re: What's going to happen with the M6 ?

Kickindirt 74 November 16, 2020 08:53PM

Re: What's going to happen with the M6 ?

OregonGregg 54 November 16, 2020 09:23PM

Re: What's going to happen with the M6 ?

Kickindirt 49 November 16, 2020 10:23PM

Here ya go

OregonGregg 50 November 16, 2020 10:42PM

That's not the response I expected . . . . . thinking

UtahRich 49 November 16, 2020 09:10PM

Re: That's not the response I expected . . . . . thinking

D&P-OR 48 November 16, 2020 09:25PM

So is Patsy there too ?

UtahRich 44 November 16, 2020 09:30PM

Re: So is Patsy there too ?

D&P-OR 43 November 16, 2020 09:42PM

Dinner Bell

UtahRich 43 November 16, 2020 09:44PM

confused smiley

UtahRich 48 November 16, 2020 08:32PM

The M6 - We need some clarification with your results.

UtahRich 57 November 16, 2020 07:14PM

Re: The M6 - We need some clarification with your results.

OregonGregg 57 November 16, 2020 08:11PM

OregonGregg being a pain in the behind again sad smiley

UtahRich 50 November 16, 2020 10:38AM

Rich, a few comments back to you.

Monte 65 November 16, 2020 01:21PM

What's Your Detector IQ ?

UtahRich 46 November 16, 2020 07:40PM

Re: OregonGregg being a pain in the behind again sad smiley

EL NINO 45 November 16, 2020 12:17PM

Re: OregonGregg being a pain in the behind again sad smiley

Druid 38 November 16, 2020 11:28PM

Re: OregonGregg being a pain in the behind again sad smiley

EL NINO 38 November 17, 2020 05:46AM

Re: OregonGregg being a pain in the behind again sad smiley

Druid 21 November 18, 2020 12:00PM

Re: OregonGregg being a pain in the behind again sad smiley

EL NINO 24 November 18, 2020 02:54PM

Re: OregonGregg being a pain in the behind again sad smiley

EL NINO 28 November 18, 2020 01:39PM

This machine looks familiar

zincoln 20 November 18, 2020 04:05PM

Re: This machine looks familiar

EL NINO 25 November 18, 2020 08:45PM

Thx for sharing

zincoln 19 November 18, 2020 10:44PM

Re: Thx for sharing

EL NINO 23 November 19, 2020 03:35AM

Setting Up Tests for your own detectors -

UtahRich 48 November 16, 2020 07:30PM

Agree 100%

OregonGregg 43 November 16, 2020 11:08AM

Customizing a Test -

UtahRich 50 November 16, 2020 06:52PM

Re: Agree 100%

Kickindirt 54 November 16, 2020 05:57PM

Joel, just some responses to your thoughts.

Monte 26 November 17, 2020 09:26PM



Sorry, only registered users may post in this forum.

Click here to login

Online Users

Guests: 44
Record Number of Users: 13 on January 18, 2018
Record Number of Guests: 632 on November 18, 2020