Welcome! Log In Create A New Profile

Advanced

Re: Did a little different testing

December 14, 2020 02:16PM
.... Yes, you're right Zincoln ..., with Spectra V3 in separation in mix mode it helps to reduce the sensitivity of Allmetal to a much lower level ... and Spectra can better mask the desired target in separation ...,

As far as discrimination is concerned, I still stop the opinion that a certain level of discrimination can improve the detector's behavior in detection - simply too much signal from the railway zone can affect the correct calculation of the ID at the detector, but also on the audio side in the readability of the separated signal.

The last time I verified this was XP ORX., Where in a 3D test I better separate the signal for discrimination 7, ... than for discrimination 5.5 ...
Attachments:
open | download - IMG_20201118_143507.jpg (7.58 MB)
open | download - VID_20201118_150125_Moment_Moment.jpg (2.37 MB)
Subject Author Views Posted

OregonGregg does a test. Attachments

OregonGregg 217 December 12, 2020 01:31PM

Re: OregonGregg does a test.

glabelle 96 January 04, 2021 09:47AM

Re: OregonGregg does a test. Attachments

OregonGregg 98 January 04, 2021 10:03AM

Did a little different testing

zincoln 119 December 13, 2020 08:50PM

Re: Did a little different testing Attachments

EL NINO 123 December 14, 2020 02:16PM

Re: sounds like ya have a winner Gregg

Kickindirt 126 December 12, 2020 08:44PM

Re: sounds like ya have a winner Gregg

OregonGregg 96 December 13, 2020 03:07PM

Re: OregonGregg does a test.

D&P-OR 120 December 12, 2020 02:56PM

Nox 800

OregonGregg 120 December 12, 2020 03:25PM

Re: Nox 800

D&P-OR 126 December 12, 2020 05:15PM

Re: Nox 800

OregonGregg 104 December 13, 2020 03:11PM

Re: Nox 800

D&P-OR 100 December 13, 2020 08:12PM



Sorry, only registered users may post in this forum.

Click here to login

Online Users

Guests: 12
Record Number of Guests: 859 on February 28, 2021