Welcome! Log In Create A New Profile

Advanced

Re: An audio Threshold setting can be very important.

December 27, 2021 09:18AM
So i should have a hum threshold on the Compass xp 350? Mine is the revision J board and has a trimmer and can go silent search, but where i am going to use this machine the targets will be deep. I have worked the area pretty hard over the years. There is a flood silt layer from 1994. About 6 inches in some spots according to dips and swells in the grounds. I need maximum depth. Disc not issue, gotta dig some trash anyway and rewards could be good doing so. Not much iron, only in a few places ii know pipes are etc. Again can get rid of it digging and tossing. The ground registers high 80s minraluzation. Near the road and power lines the sens on most units pick up a buzz, but that area not really used by folks. This place may go away soon with elderly owner. Been great. One last hurrah.

May the last hole i dig be my own, and will a fellow detectorist cover me up. And you can have the pulltab!
Subject Author Views Posted

Importance of threshold

dixiedigger57 87 December 26, 2021 08:18AM

An audio Threshold setting can be very important.

Monte 54 December 27, 2021 04:42AM

Re: An audio Threshold setting can be very important.

dixiedigger57 41 December 27, 2021 09:18AM



Sorry, only registered users may post in this forum.

Click here to login

Online Users

Guests: 17
Record Number of Guests: 1023 on May 05, 2021