Welcome! Log In Create A New Profile

Advanced

Re: The V3i vs The Board

May 03, 2017 03:36AM
Pablo - i'll do some more tuning next week as i'll have some time and can truly compare and dial it in. On the salt program, i have the recovery delay at 65 and the filter at 10hz high pass. These are not deep settings, but for the nailboard/ghost town environment, this creates separation with the small 5.3 coil. 6x8 SEF performs acceptably on these as well, but misses 1 to 2 paths - try your 4x6 with these. I see that my Hi Pro program settings were also at 65 delay, but 5hz band pass. Not quite as crisp on the board. I am also running 3 frequency best data as i find, imo, to be more capable of selecting good targets. I get better depth from 2.5kHz, but on deeper targets the nails fool me more easily than when running 3 frequency, and i can tell a lot from the spectrograph and polar plot comparing the 3 frequencies. You get used to how a deep coin of varying composition looks...and what it looks like when you have mixed targeted under the coil (not sure if you are new to the V3i or not). I'll share again after really working the settings next week.

Zincoln
Subject Author Views Posted

The V3i vs The Board

Pablo61 248 April 29, 2017 11:50PM

Re: The V3i vs The Board

glabelle 92 May 22, 2017 04:28AM

Re: The V3i vs The Board

zincoln 80 May 22, 2017 01:27PM

Re: The V3i vs The Board

RickUK 138 May 06, 2017 10:37AM

Re: The V3i vs The Board

zincoln 139 May 01, 2017 02:19AM

Re: The V3i vs The Board

Pablo61 121 May 01, 2017 12:54PM

Re: The V3i vs The Board

zincoln 127 May 03, 2017 03:36AM

V3i optimized test results

zincoln 112 May 12, 2017 03:25AM

Re: V3i optimized test results

Pablo61 96 May 16, 2017 12:10PM

Love for the MX Sport

Rich (Utah) 104 May 18, 2017 03:12AM

Re: The V3i vs The Board

Pablo61 105 May 05, 2017 01:15AM

Now you have me curious. thinking

Monte 164 May 03, 2017 10:32AM

Re: Now you have me curious. thinking

zincoln 138 May 04, 2017 02:55AM

Brian, very good answers.

Monte 122 May 04, 2017 12:33PM

Yep, I agree....

OregonGregg 114 May 04, 2017 08:42PM

Re: Yep, I agree....

NWCindy 111 May 04, 2017 09:00PM

Re: Yep, I agree....

OregonGregg 110 May 04, 2017 09:10PM

Sad Sad Day Attachments

OregonGregg 167 May 05, 2017 02:13PM

Sad Sad Day

Rich (Utah) 126 May 06, 2017 02:46AM

Re: Sad Sad Day

Remfire 127 May 06, 2017 01:08AM

Re: Sad Sad Day

NWCindy 143 May 05, 2017 08:30PM

Re: Sad Sad Day

OregonGregg 130 May 06, 2017 12:31PM

Re: Sad Sad Day

NWCindy 102 May 06, 2017 02:45PM

Re: Yep, I agree....

NWCindy 106 May 05, 2017 03:21AM

Should this prove helpfulsmiling smiley Attachments

zincoln 124 May 04, 2017 11:59PM

Re: Should this prove helpfulsmiling smiley

NWCindy 113 May 05, 2017 03:42AM

Re: Should this prove helpfulsmiling smiley

OregonGregg 104 May 05, 2017 12:50AM

Coils can help with the V3i, and usually

Monte 150 April 30, 2017 03:26AM

Re: Coils can help with the V3i, and usually

Pablo61 124 April 30, 2017 04:43AM

Thank You, and that's usually about

Monte 135 April 30, 2017 01:02PM

Re: Indian Head

Pablo61 119 April 30, 2017 10:28PM

Somewhat interesting with the Indian Head cent.

Monte 119 May 01, 2017 08:13AM

Re: Somewhat interesting with the Indian Head cent.

Pablo61 103 May 02, 2017 04:52AM

Re: Thank You, and that's usually about

Pablo61 114 April 30, 2017 06:56PM

Re: The V3i vs The Board

Kickindirt 136 April 30, 2017 02:44AM

Re: The V3i vs The Board

Pablo61 128 April 30, 2017 04:44AM



Sorry, only registered users may post in this forum.

Click here to login

Online Users

Guests: 17
Record Number of Guests: 182 on September 16, 2016