Honestly, I have come very close to ordering a Quest Pro and / or Q40. I only wonder how different it might perform compared with the 13 kHz Teknetics T2. If it's too much of a copy, then it wouldn't give me anything different in performance. However, if the Q40 works better than T2 series with a 5" DD, then I would wonder how it might compare against the FORS CoRe or FORS Relic. If it can match what the CoRe or Relic can do in a dense iron nail contaminated site with a 5" DD coil, it might just find a permanent home.
As for a 5" DD coil,I have a lot of trust in the NEL product like, and I wonder how the Russian-made MGC 5" coil would do? They both do the right things of putting the rod-mount ears at or very close to center. I wish detector manufacturers would get away from positioning the rod-mount closer to the back edge of a coil. I noted the CORS 5" DD for the Quest has the rod-mount toward the rear. Nokta / Makro 5" on my Relic is toward the rear as is the Racer II's. That can cause coil flop or being easily bumped out of position whereas a center-mount position is best.
Thanks for the inks.
Monte
"Your EYES ... the only 100% accurate form of Discrimination!"
Stinkwater Wells Trading Post
Metal Detector Evaluations and Product ReviewsI'm now located in Clyde, Texas monte@ahrps.org ... or ... monte@stinkwaterwells.com 325-481-8147Detector Outfit: A selection of my favorite makes and models, with the best coils mounted, for the tasks I'll take on.Pinpointers: Pulse-Dive & ProPointer AT .. Headphones: 'Hornet' & 'Wasp' .. MS-3 Z-Lynk .. N/M Green edition*** All working well today to make memories for tomorrow. ***
Edited 1 time(s). Last edit at 11/29/2020 10:06PM by Monte.