Mr. Monte ... today I tried to test the whites 5.3 "concentric coils and also the 6x8" SEF coil on the original Nail board Performance test ....
Whites 5.3 concentric coil ...
.... While 5.3 concentric coil .. achieved good results in various programs with a set discrimination of 1.7-2 /elimination nails/.. I achieved in this separation test about 6.5 -7 points out of 8max ... sometimes I had to control the movement of the coil for a good result ... but it can be achieved ...
Detech 6x8 "SEF .... after experience with this coil in Whites Spectra V3 from many before where this coil for its size very badly separated in the nailboard test ... worse than 10" DD Whites coil .... I started testing this coil on various programs at Mxt All Pro ...
For this test and this coil, I had to set the discrimination to number 2 in order to discriminate the nails in the test, so I could start testing ...
In the classic programs Coins and Jewelry, Relic and Prospecting .. I achieved only relative results of separation .... much worse than the coil Whites 5.3 concentric coil ..
Here I agree with all those who achieved similar results in the separation nailboard test ...
But there is one exception to this rule .. the program that usually works for this coil 6X8 SEF coil ....
:
Modified program:
Prospecting program, Hyper-sat, Gain 7-8, Iron grunt ON, Threshold set to silent....
The results of the test are excellent .. 7 points out of 8 max ..and if you slow down the sweeping of the coil a bit, you will also achieve 7.5-8 points out of 8 points max ...
The work of this program strongly resembles a fast 2 ton analog detector, but it has the advantage of an ID as well as a% indicator of the probability of iron.
..
Edited 2 time(s). Last edit at 06/18/2020 04:55PM by EL NINO.